3DE All Metal Hotend Upgrade Kit (Steel) – MK10

Opgrader din MK10 extruder til All Metal hotend og slip for de problemer der kan være ved den gamle PTFE indsats.

Dette kit inkluderer tube og 0.40mm stell/brass nozzle – alt efter valgt model.

Dag til dag levering.

Der findes en lille fin installationsvideo under beskrivelsen i dette produkt der på få minutter kan installeres på din MK10 hotend.

Passer bl.a. til Wanhao og Flashforce

This is an all metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle.

Thermal barrier tube is made from 2 different materials. The lower thermal heatbreak is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature then possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length. Kit includes 1 nozzle and 1 thermal tube.

Install video for Wanhao Duplicator I3 series